It is an extremely difficult technology to produce floaters with less variation in traditional blow molding. If the wall thickness is uneven, it will be crushed by water pressure and become useless.
Since its inception, Keystone has been committed to domestic production and blow molding, and designed to cope with squid fishing throughout Japan, with a thick body that can handle water depths up to 200m. Base color, cloth type, cloth color, many available to meet various requests. Faithful to the basic performance, the best finish carefully one by one.
At a factory in Arita-cho, Saga Prefecture, we consistently produce high-quality products in a consistent manner from design to mold molding to product molding.
Size, color is abundant
For more than 15 years since 1999, we have provided high-quality, consistent “ Kukisutte (ukissute) ” mainly for fishing cooperatives (for squid fishing fishermen) .
Depending on the region, there is a preferred size and color of the base body, and it is also characterized by a very abundant size development and standards to meet all needs. Only seven sizes in size. There are 5 base colors. Cloth color is 16 colors.
The balance sought by the advanced fishermen Sutte, like Esamaki Sutte, is extremely compelling, and thanks to you, we have gained tremendous confidence over the last 15 years.
Cotton with little water absorption and strong cohesion
→ About 500 times larger image of cotton by cotton
The fiber itself is on the pipe
Cotton The strongest cotton that has its own buoyancy.
Because each fiber is thick and strong in cohesion
The strong teeth of kanatofugu and squid also have very strong characteristics.
That is why the fishermen prefer to use Bibinsutte and this cotton.
→ About 500 times larger image of “General” cotton
Cotton, as expected, is likely to lose its buoyancy, as the fiber itself is likely to absorb water, so cotton is the most important cause.
Because the fiber itself is thin and not cohesive, the fiber jumps out quickly when it is squeezed by kanatofugu or squid.
What is required of cotton wrapped in Sette is that it is a material that has a strong cohesiveness and is difficult to absorb.
Color chart
Base body color
Cloth color (normal)
Cloth color (metallic)
Standard of bibinsutte needle
・ TV 2 needle (standard)
The TV 2 is commonly referred to as “Tegs-rolling” or “Hand-rolling”, and by fixing the squid needle with tegs (threads), the floating stand is reduced in weight. TV2 is a traditional standard for maintaining the balance of floats in the best, and many fishermen use floats in this standard. In particular, fishermen who aim for squid and kensakiika, when doing cascading fishing, use the careless Sutte’s balance, so many adopt the carefree Sutte equipped with TV2. The buoyancy balance of Bibinsutte equipped with TV2 is compatible with various EDAS lengths, and is widely used for aiming at squid and kensakii by fishing on a general boat.
・ R2 needle (made upon order)
When ordering, you can also create an R2 needle if you can specify it. Since the needle is slightly heavier than the two TV needles, the needle is slightly lower than horizontal in the sea, but by using its weight, the upper and lower tension becomes dynamic. The R2 standard needle is stronger than that of the TV2 standard, so it is recommended when durability is required, such as direct connection. In the case of swing mechanism which put out Edas, 1 to 5 cm use is recommended.
If the metallic cloth is broken
Among various colors of bibinsutte, color which wrapped popular metallic cloth .
However, it may be broken by the blowfish or squid teeth.
I think that many people think that they can not catch fish because they look bad.
At that time, let’s cut off the metallic cloth with scissors!
When the metallic cloth is removed, the base normal cloth appears and can be used again in the state ofthe normal cloth.
If you do not like it, give it a try.
※ Be careful not to cut the sewing thread which is holding the cloth.
